Round-up: Easter deals for Vestas, SGRE, Nordex

WORLDWIDE: Three major manufacturers secured a series of turbine orders over the Easter period, boosted by the end-of-quarter rush.

Repeat customer Xcel Energy has ordered Vestas new V120-2MW turbine for a project in North Dakota
Repeat customer Xcel Energy has ordered Vestas new V120-2MW turbine for a project in North Dakota

Vestas

The Danish manufacturer won a number of orders at the end of Q1, mostly in the US, but also in Germany, Italy and India.

In India, Vestas secured a 50MW order from developer Powerica for the Bhatel project in Gujarat, north-west India.

Powerica has placed the first ever order for Vestas' V120 2.2MW turbine. Commissioning is expected in early 2019.

In Europe, the firm clinched a 20.7MW order from German developer ABO Wind for six V136-3.45MW turbines.

The machines will be delivered to the site in south-west Germany by the end of 2018. The project won its permit at the auction earlier this year.

Italian developer Fri-El has placed two orders totalling 51MW for projects allocated in an auction at the end of 2016.

Six V117-3.3MW turbines will be delivered to the Albareto project in Emilia-Romagna, northern Italy, while 14 V110-2MW turbines will be installed at the Medio Campidano on the island of Sardinia.

And in the US, Vestas won a 135MW order from Copenhagen Infrastructure Partners. The Blue Cloud project in Texas will use Vestas' V126-3.45MW turbines, which will be serviced by the manufacturer for 25 years. It is due online by the end of the year.

Developer Terra-Gen has placed a 159MW order for V117 turbines optimised to 3.6MW of output. The machines will be installed at the Voyager II project in California from Q2 2018.

Berkshire Hathaway-subsidiary MidAmerican Energy has placed a further 92MW order for the 2GW Wind XI cluster of projects in Iowa.

Xcel Energy ordered Vestas' new V120-2MW turbine for its 150MW Foxtail wind project in North Dakota. It will be the first North American project to use the turbine model.

Finally, Vestas won a 209MW order from an unnamed customer in the US for its V136-3.45MW turbine.

The firm also extended its service agreement with another undisclosed customer for a further ten years. It covers four wind projects totalling 1.15GW of capacity.

 

Nordex

German manufacturer Nordex has won three orders from Turkey from unnamed, but repeat, customers.

The orders total 178.8MW made up from 47 turbines of the company's N131 model, with either 3.6MW or 3.9MW outputs.

Nordex will also service the turbines under a "multi-year" maintenance deal following shipment of the machines beginning in September.

The latest order follows a 21.6MW deal with compatriot developer PNE Wind for the Gerdau wind project in northern Germany. Six N131 3.6MW turbines will be installed "this autumn".

The project was also awarded its permit in the German auction round earlier this year, the manufacturer said.

"The order is the first call down under a framework contract signed last year for a total volume of around 140 megawatts ,which is to go on line in Germany by 2020. For most of the projects, PNE Wind has opted for the N149/4.0-4.5 turbines, which will be going into volume production in 2019," Nordex said.

Nordex has received a 21.6MW order from investment firm Leonidas Associates for a project in France. Nine N117 2.4W turbines will be installed from September 2018.

 

Siemens Gamesa

Siemens Gamesa Renewable Energy (SGRE) has been awarded five onshore orders in Germany, for a total of 20 turbines with a combined 52.3MW of output.

Operator Getproject is expanding one of its Brandenburg projects by ten 2.1MW turbines. The machines will be installed by the end of the year.

Developer Wind-projekt has ordered three 3.2MW turbines for the Papenhagen project and two 3.15MW turbines for the Hof Tatschow project, both located near Rostock, northern Germany.

A single 3.6MW turbine will be installed in Saxony, east Germany, for operator BMV Energie.

Finally, four 3.2MW turbines will be installed in Bremen, north-west Germany, for Energiekontor at a new 12.8MW project.

All orders include 20-year servicing deals.

SGRE will also supply turbines to the Formosa 1 Phase 2 offshore wind project in Taiwan.

Twenty 6MW turbines, with a 154-metre rotor, will be delivered to the Taiwan Strait site in 2019, subject to a positive financial investment decision by developers Swancor, Ørsted (formerly Dong Energy) and Macquarie Capital.

The first phase of the Formosa 1 project was installed in 2016 comprising two Siemens 4MW turbines.

Have you registered with us yet?

Register now to enjoy more articles
and free email bulletins.

Sign up now
Already registered?
Sign in

Windpower Monthly Events


Latest Jobs